• White color, mild odor
• Eliminate and suppress any foam generated in recirculating and dampening systems l Safe, non-flammable, non-damaging to equipment and other materials
• Blends easily with all liquids

• Fountain solution additive, accelerate ink drying, no effect to fountain solution properties l Reduce spray powder
• Necessary to every printer, special for winter

• World famous standards of industry
• Removes smudges, fingerprints, tape adhesives, dust, lint, and spots from all film and glass
• Contains anti-static compounds to prevent static which can cause pinholes in film

• Easy to use - repair made while blanket is on the press. No need for removal. Saves valuable time
• Quick action formula - goes to work immediately. Raises batters and low spots in less than two minutes
• Applicator brush in can - the brush is attached to the screw top for convenient application

• Strong, triple action, cleaner and desensitizer for use on metal plates, chrome rollers, or metal cylinders
• Removes ink, gum glaze, and paper coating
• Leaves plate non-image areas clean and desensitized
• Contains mild cleaning solvents, acid desensitizers, and gum that are COMPATIBLE WITH ALL PLATES.

• Can be used on any type of ink Will not harm ink
• Convenient
• Eliminates waste -retards oxidation, the time, effort and waste of removing ink skin is eliminated. Ink costs can be cut up to 40%
• Longer protection - prevents ink skinning for longer periods, yet will not stop the normal drying of ink on the sheet

• Environmentally friendly formula
• Non-VOC, no flash point
• Shortens wash up time
• Reduces amount of solvent used
• Deep cleans and deglazes rollers
• Excellent for short runs and frequent color changes
• Extends roller and blanket life

DESCRIPTION:
          GLAZE-OFF is a combination of ink solvents fast deglazing, cleaning and conditioning of rubber blankets. It penetrates deep into rubber to remove friction glaze, gum glaze, ink glaze, surface oxidation, and light embossing. At the same time, rejuvenates rubber and leaves it with a clean ink receptive surface. GLAZE-OFF was developed to quickly remove glaze from the blanket during a print run, leaving smooth and ink-receptive. Thorough deglazing of blanket is usually time-consuming; with GLAZEOFF, the process is accomplished within a few minutes.

FEATURES:

• Fast action - contains fast-acting concentrated solvents which remove glaze quickly,minimizing downtime.
• Extra strong - thorough, deep cleaning due to powerful cleaning agents.
• Quick drying - dries fast, enabling fast start-up.
• Dual purpose - it can be used to clean water-metering rollers on alcohol-type dampening system (except for brown Dahlgren plastic rollers).
• High flash point - over 130° F. Can be stored in any quantity without incurring insurance penalties.

• Cost effective anti-offset emulsions
• Both antistat and conductivity for use dosing
• Out perform other 60% emulsions

DESCRIPTION:
           Dried coating is difficult to clean, even with warm ammonia water. OPV QUICKSTART attacks dried coating, making it become soluble and easy to remove. OPV QUICKSTART has a low ammonia odor and can be safely used on coater blankets, metal parts and even concrete.
FEATURES:

• Mild odor.
• Attacks dried coating faster than ammonia water.
• Controlled drying rate.
• Non-damaging - cleans rubber rollers, blankets, metal parts and all surfaces without damage.