Product Info---Other Pressroom Accessories
Equipment:
"Fail Safe" Fountain Solution Mixing System
This is the ideal mixing system for every printer. A small sheet-fed shop can achieve better consistency and prevent overuse and waste of fountain solution. While, a large web shop may not want to make additional large investments. Believe it or not, these blenders are supplying five 8 Unit M-1000'S with no problem. The accuracy and reliability are often better than in systems which cost 2 to 3 times as much, and these Dosatron pumps can run for years with little to no attention.
  • Accurate to ±1/10 ounce per gallon, and delivers 0 to 11 gallons per minute.
  • Just hook up the water and start using - no expensive installation change.
  • Will add 1.25 to 12 ounces of concentrate per gallon of water.
  • All plumbing inside a lockable, stainless steel cabinet to prevent tampering.
  • Quickly pays for itself in chemistry savings compared to hand mixing.
  • Back-up or "two-par" fountain solution configurations.
  • Easy maintenance, just replace the O-rings and seals.
Operating Principle:
Installed directly onto the water supply lines, these injectors operate without electricity, using the flow of water as the power source. The water activates the injector, which takes up the precise dose of concentrate directly from the solution container. The concentrate is then mixed with the water and forced downstream. The amount of concentrate is always directly proportional to the volume of water that enters the injector, regardless of variations in flow or water pressure in the main line.
Unit Specifications:
Dimensions: 31.5"×24"×8.5"
Lockable, heavy duty, stainless steel cabinet
Includes all internal plumbing;
Pressure regulator
200 mesh /80 micron filter
One way check valve
Ball valves to control flow
Connections: 3/4"
Solution flow range: 0.05 to 11 gpm
Unit Configurations:
Fail Safe S210W
Application: Small to medium sheet-fed or web printers, who do not want a backup system
Dispenser: One DI210
Dosage range: 2.0% to 10.0% 2.5 to 12.5 ounces/gallon
Pressure range: 7 to 57 PSI  
Fail Safe T210W
Application: Medium to large web printers, who want a backup system
Dispenser: Two DI210 in switchable configuration
Dosage range: 2.0% to 10.0% 2.5 to 12.5 ounces/gallon
Pressure range 7 to 57 PSI
Fail Safe T150SF
Application: Any sheet-fed printer who uses fountain solution and alcohol substitute
Dispenser: TWO DI150 in series for mixing two-part systems
Dosage range: 1.0% to 5.0% 1.3 to 6.5 ounces/gallon
Pressure range: 4.3to 85 PSI
 
 
Measuring Meters
HANNA Liquid testing meters: DIST4       HI 9811
Accurate SKS Magnifying Lens made in Japan;
Magnifying lens made locally.

 

 

 

 

 

 

 

 

 

[Company]   [Product Info]   [Customer]   [News]   [Address]   [Job]   [Message]   [Navigate]
版权所有 上海中福怡宝化工有限公司
Copyright Shanghai ZhongFu Polychem Co.,Ltd